2. Press the “SET” button, then press the “POWER” button, until the indicator lamp lights up, then release the butt. The remote control will be in manual code search mode.

3. Press the “VOLUME+” or “VOLUME” button once, the indicator lamp will flash once. Now check if the volume symbol appears on your TV. If not, repeat this procedure.

4. Until the volume symbol appears on your TV, test whether other function buttons (except “SET”, POWER” and “VOLUME”) such as “MUTE” are working. If not, repeat steps 2 and 3, until find the right code.

*Keep the last code, when the remote control enters the key within 30 seconds or press the “SET” key.

D. 1908 Auto search code:

1. Turn on your TV, let your TV be in the normal state, and point the remote control in front of the TV.

2. Press and hold the “SET” button for about 4 seconds until the indicator lamp lights up, the remote control will enter the auto search state, pay attention to your TV, check whether the volume symbol appears on your TV, if is like this, release the “SET” button at a time, adjust the finishes.

3.Test if other function buttons (wait for “Settings”, Power” and “Volume”) like “Mute” are working. If not, repeat steps 2 and 3, until you find the proper code.

1908 Search point-to-point brand:

1. Turn on your TV. Let your TV be in the normal state and point the remote control in front of the TV. Find the corresponding brand of your TV and remote control; for example, SHARP=”1″.

2. Press and hold the corresponding brand button for 4 seconds, and the indicator lamp will flash. When the volume symbol appears on your TV, press the release button at once, the indicator lamp will go out and the setting is finished.

F. 1908 Restore Factory Settings

Press the “SET” button, then press “0”, release the button. The indicator will flash twice, the remote control restores its factory settings.