نقد و بررسی
ماژول تایمر و ساعت XY-BJ با رله و سون سگمنت- ولتاژ کاری:5 تا 60 ولت دی سی
- دارای 5 مد کاری محتلف
- ابعاد:74 در 44 میلی متر
- جریان مصرفی:300 میلی آمپر
- دارای باتری 1216 برای بک آپ زمان
- دارای سون سگمنت برای نمایش زمان و امکان تنظیم کردن ساعت و زمان مورد نیاز
ماژول تایمر و ساعت XY-BJ با رله و سون سگمنت
از این ماژول برای تنظیم زمان قطع و وصل بودن یک بار استفاده می شود.رله ی به کار رفته بر روی ماژول از نوع 10 آمپر 220 ولت بوده و امکان اتصال یک مصرف کننده تا این مقدار ولتاژ را دارا می باشد.
ماژول تایمر و ساعت XY-BJ با رله و سون سگمنت
خرید مدل های مشابه:
ماژول تایمر 30-6 ولت قابل تنظیم با رله و نمایشگر JZ-801
ماژول ساعت دماسنج ولتمتر DS3231SN
ویژگی های ماژول تایمر و ساعت XY-BJ با رله و سون سگمنت:
- ولتاژ کاری:5 تا 60 ولت دی سی
- دارای 5 مد کاری محتلف
- ابعاد:74 در 44 میلی متر
- جریان مصرفی:300 میلی آمپر
- دارای باتری 1216 برای بک آپ زمان
- دارای سون سگمنت برای نمایش زمان و امکان تنظیم کردن ساعت و زمان مورد نیاز
- دارای بازر برای اطلاع از قطع یا وصل بودن رله
- امکان اتصال شارژر موبایل برای تغذیه ماژول
ابعاد کلی ماژول ماژول تایمر و ساعت XY-BJ:
ماژول تایمر و ساعت XY-BJ با رله و سون سگمنت
Featured Products:
5.0V ~ 60V wide voltage power supply;
One mode can be set for various time periods, it can reach 5 time periods;
With buzzer alarm function.
Introduction mode:
OPE: Relay close time point, CLE: Relay off time point
Time period: PE-1 ~ PE-5 5 time periods (OPE to CLE is a time period)
P-1: The relay closes or pulses every day until the OPE time point, and the relay turns off or pulses until the circle time point.
P-2: set the day, up to the OPE time point when the relay has closed or pulse output, to the CLE time point when the relay disconnects / or the output pulse
P-3: Set the date of the month, up to the OPE time point when the relay closes or exits the pulse, to the capsule time point when the relay is off or the output pulse
P-4: Set date 1 to date 2, start each day at OPE time point, end with cycle time point, relay action or output pulse
P-5: as in P-4, only the month cannot be set
راهنمای کلی ماژول:
ماژول تایمر و ساعت XY-BJ با رله و سون سگمنت
How to set the time?
At the time of running the interface, press the Down button for a while:
Step 1: Select the time period: PE-1 ~ PE-5 Press up and down to select;
Step 2: Press the SET key to select the mode: P-1 ~ P-5 (set this time period to the corresponding mode) by pressing the up and down keys. (“—-” means block this period of time)
Note: Each time period can be repeated from the “—-“, P-1 ~ P-5 one of the optional; For example, you can let five time periods at the same time work in P-1 mode, or let time period 1 work in P-1 mode, time period 2 work in P-2 mode. , etc.
Step 3: After finishing the mode selection, press the SET key to enter the time period setting interface, set the interface to the time period, press the set key to change the parameter, “OPE” Time point start, “CLE” end point, “dAE” date information;
Step 4: After setting the parameters to exit the setting, press the SET button for 2 seconds to release it, automatically check whether the parameter setting is legal, legal to save the parameters, return to time to run the interface; If the parameter is wrong, “ERR” reminder (for example, Stop time or date <= start time or date), return to the parameter setting interface;
Additional features: each “time period” can be set individually
In the specific parameter setting interface (after the second step), press the STOP button to switch the output mode:
OUT1: the start time point turns on the relay, the end time is off.
OUT2: outputs 1S press to start or end the time
In the specific parameter setting interface (after the second step), long press the STOP button to change the call mode:
BLL0: ring deactivation
BLL1: Activation Ring
Note: When the bell rings, press any button to stop the ring
Expansion stop key function:
Relay activation mode:
1. On: activate relay;
2. Off: Do not turn on the relay, it is always off;
Press the stop button on the time display interface to switch between on and off, the current status will flash, and then return to the main interface. (This function is the emergency stop function, press once to close the relay closed)
After broadcasting is disabled, the product can be used as an alarm clock.
To sleep:
1. CP sleep mode: within five minutes, without any operation, the digital tube automatically turns off the screen, the normal operation of the program;
2. Od Normal mode: the digital tube is always open;
Press the stop button for a while after 2 seconds to release it, to achieve CP and od status of the switch, the current status will flash and then return to the main interface.
Description XY-BJ:
- Wide power supply range: 5~60V; Reverse protection function can prevent the relay module from burning when relay is connected wrongly..
- Buzzer alarm function: Not only it can display the real time, but also can be used like an alarm clock. Press any button can stop the buzzer when it rings..
- Five time modes: Easy and convenience to set the time and parameters. You can set the time/date in the mode. And you can set multiple time periods in a mode, but cannot over 5 time periods..
- Two power supply methods: Can input DC 5~60V to supply, also can use Micro USB 5V to power on..
- Note: the end time/date (CLE) > the start time/date (OPE).
- ›See more product details.
- Imported from UK.
Parameters:
Wide voltage range: 5.0V~60V
USB Power supply: Micro USB 5.0V input
Special functions: Reverse protection function; Buzzer alarm function
Size: 74*44*18mm
0دیدگاه