میکروکنترلر ATMEGA8A-PU پکیج DIP اورجینال

میکروکنترلر مگا8 از جمله قدیمی ترین و کاراترین میکروکنترلهای شرکت اتمل بوده که با ولتاژ کاری 2.7 تا 5.5 ولت دی سی و فرکانس ماگزیمم 16مگاهرتز کار می کند.

ویژگی ها:

• ولتاژ کاری در فرکانس 8 مگا هرتز :2.7 تا 5.5 ولت
• ولتاژ کاری در فرکانس 16 مگا هرتز :4.5 تا 5.5 ولت
• ولتاژ کاری:2.7 تا 5.5 ولت
• تعداد پایه ها: 28 پایه
• جریان مصرفی در حالت عادی:3.6 میلی آمپر
• حافظه فلش:8 کیلو بایت
• قابلیت نوشتن و پاک کردن حافظه:10000 بار
• تعداد آنالوگ به دیجیتال:6 عدد

ATMEGA8A-PU IC Microcontroller (DIP)

Description

ATMEL ATmega8A-PU DIP-28 Microcontroller from Atmega8A family is a high-performance, low-power Atmel 8-bit AVR RISC-based

microcontroller combines 8KB ISP flash memory, 1KB SRAM, 512B EEPROM, a 7-channel/10-bit A/D converter (TQFP and QFN/MLF), and

debugWIRE for on-chip debugging.

The device supports a throughput of 16 MIPS at 16 MHz and operates between 4.5-5.5 volts.

By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power

consumption and processing speed.

Features:

Advanced RISC Architecture.

32 x 8 General Purpose Working Registers.

Fully Static Operation.

Up to 16 MIPS Throughput at 16 MHz.

On-chip 2-cycle Multiplier.

High Endurance Non-volatile Memory segments.

Write/Erase Cycles: 10,000 Flash/100,000 EEPROM.

Optional Boot Code Section with Independent Lock Bits.

In-System Programming by On-chip Boot Program.

True Read-While-Write Operation.

Programming Lock for Software Security.

Extensive On-chip Debug Support.

8 Single-ended Channels.

Byte-oriented Two-wire Serial Interface.

Programmable Serial USART.

Master/Slave SPI Serial Interface.

Programmable Watchdog Timer with Separate On-chip Oscillator.

Minimal circuit required for a complete functional project.

Applications of ATmega8 Microcontroller:

Multiple DIY projects.

Projects requiring more than logical control for devices.

Microcontroller applications for multiple device interface/Control.