نقد و بررسی
- دارای 12 pinout که شامل خواندن و نوشتن و اینتراپت و pwm و I2C می باشد
- دارای OLED 0.96 اینچ
- ولتاژ ورودی بین 4.75 الی 12 ولت
- دارای میکرو USB
- دارای 1 عدد ورودی آنالوگ
ماژول Nodemcu Wifi And NodeMCU ESP8266 + 0.96 Inch OLED
ماژول NODEMCU به همراه وای فای و نمایشگر 0.96 اینچ OLED به همراه پین هدر اورجینال این ماژول از سری ماژول های NodeMCU بوده که همراه نمایشگر و ورودی میکرو usb عرضه شده است.پکیج شامل خود ماژول و پین هدر هست.
ماژول Nodemcu Wifi And NodeMCU ESP8266 + 0.96 Inch OLED
خرید مدل های مشابه:
ویژگی های ماژول Nodemcu Wifi And NodeMCU ESP8266 + 0.96 Inch OLED:
- دارای 12 pinout که شامل خواندن و نوشتن و اینتراپت و pwm و I2C می باشد
- دارای OLED 0.96 اینچ
- ولتاژ ورودی بین 4.75 الی 12 ولت
- دارای میکرو USB
- دارای 1 عدد ورودی آنالوگ
ماژول Nodemcu Wifi And NodeMCU ESP8266 + 0.96 Inch OLED
Nodemcu Wifi And NodeMCU ESP8266 + 0.96 Inch OLED
The D-duino V1 is a specially designed ESP8266 & NodeMCU Module with an onboard 0.96 OLED Display and native WiFi capabilities.
It is an easy-to-use and inexpensive solution to building your own real-time online API devices, which can monitor specific variables, tickers, timers and other values on the net and display changes to those values in real time via the OLED display.
This makes it a great board for anyone who is interested in IoT, stock prices, crypto trading or any other hobbies and professions in which real-time API data is important.
The board comes with an onboard micro USB port, two onboard buttons for Flash and Reset, a complete integrated ESP8266 module with antenna, as well as a 0.96 inch OLED display that has been permanently connected to the board.
This is pretty much all of the necessary Components you need to build your own API-data gadgets, already installed on the board and ready for programming.
It is capable of being programmed via both Arduino IDE and NodeMCU LUA, making it one of the most user-friendly boards available – with all of the libraries and software packs available online.
Description:
- All ESP8266 pins broken out
- 12 digital pins write/read/interrupt/pwm/I2C/one-wire supported(except D0)
- 1 analog input
- Integrated 0.96 Prime. OLED
- Micro USB connection
- Compatible for Arduino
- Compatible with NodeMCU(Lua for ESP8266)
- Input Power 4.75V ~ 12V
- Size: 6.2×2.7cm/2.44×1.06inch
Package included:
1 x Nodemcu Wifi For And NodeMCU ESP8266 + 0.96 Inch OLED Board
1 x 10 Pin
1 x 16 Pin
0دیدگاه