Specs:

1. Brand new material with high quality;

2. 100% tested before shipment;

3. Easy to configure.

How to setup:

A. Register the remote control:

1. Make sure you have installed 2 AA batteries correctly;

2. Connect the USB receiver to the USB port of the TV, place the remote control as close to the USB interface as possible. A connection picture appears on the TV screen;

3. Press the wheel (OK) in about 3 seconds, the remote control LED will light up.

4. Put the remote control into the USB receiver, the LED will blink 3 times then turn off, the registration is complete, a pointer appears on the screen;

When registration is complete, KYES direction (Up / Down / Left / Right), scroll up, scroll down, wheel (OK), p.

The settings, the pointer are RF, but other keys still hold to use IR; With some of the TV models, if there is no response when connected to a USB port, please try another USB port.

B. From pointer:

If you press the arrow keys (Up / Down / Left / Right) while the pointer is in use, the pointer will disappear from the screen.

To show the pointer on the screen again, press the pointer key. You can move the remote control slightly to the right or left to control the direction.

C. Deregister the remote control:

Hold down the BACK HOME keys and at the same time for about 5 seconds to disconnect the remote control from your TV.

The LED will blink 3 times and then turn off. The remote control will operate as a general IR remote control.

AN-MR600 Magic Remote Control for LG Smart TV Compatible for the following models:

for UnN-MR600G

for AN-MR600 / AKB74495301

for AN-MR600 / AKB74855401

for AN-MR650

for AN-MR650A

for AN-MR700

for AN-SP700

for AN-MR500G

for AN-MR500

for AN-MR400G

for MBM63935953

for F8580 UF8500 UF9500 UF7702

for OLED screen 5EG9100 55EG9200

color: black

Material: plastic

Package Contents:

1* MR600 Remote Control